2:1 & 3:1 Shrink Ratio

Heat Shrink Insulating Tubing

General-purpose heat shrink insulating tubing for cable insulation, repair, bus bar insulation and phase colour coding. Available in 2:1 and 3:1 shrink ratios from 3mm to 200mm diameter.

2:1 Shrink Ratio3:1 Shrink RatioUV ResistantFlame RetardantUp to 36kV

Overview

Heat shrink insulating tubing is the most widely used cable accessory in electrical installations. Made from modified cross-linked polyolefin, it shrinks radially when heated to wrap tightly around cables, conductors, splices and bus bars — providing electrical insulation, mechanical protection, phase identification and environmental sealing in a single operation. VIKCHEM manufactures insulating tubing in 2:1 and 3:1 shrink ratios for the full range of cable and conductor sizes used in Indian power systems.

Types Available

2:1 Thin Wall

Standard insulating tubing for general purpose wire and cable insulation. Shrinks to half its supplied diameter on heating.

3:1 Medium Wall

Greater shrink ratio for cables and conductors with larger diameter variation between minimum and maximum sizes.

Colour Options

BlackRedYellowBlueGreenWhiteClear

Key Features

  • Modified polyolefin — UV resistant and flame retardant to UL94 V-2
  • Consistent wall thickness after shrinking for uniform insulation
  • Available in diameters from 3mm to 200mm (pre-shrink)
  • Operating temperature range -55°C to +125°C
  • RoHS compliant — lead and halogen free grades available
  • Phase colour coding in red, yellow, blue, green, black and clear
  • Chemical resistance to oils, solvents, acids and alkalis
  • Easy installation — standard heat gun at 120°C to 150°C

Applications

Cable Repair & Insulation

Restoring insulation on mechanically damaged cables in service.

Bus Bar Insulation

Phase identification and insulation of switchgear bus bars up to 36kV.

Wire Bundling

Bundling and organising wire harnesses in control panels and equipment.

Colour Coding

Phase identification and circuit coding on conductors and cable ends.

Connector Strain Relief

Over moulding cable entries at connectors and plugs for strain relief.

Environmental Sealing

Sealing cable entries into equipment against dust, moisture and vermin.

Heat Shrink Insulating Tubing – VIKCHEM
Download Brochure

Specifications

Shrink Ratio2:1 / 3:1
Diameter3mm – 200mm (pre-shrink)
Temp Range-55°C to +125°C
MaterialModified polyolefin
FlameUL94 V-2
CertificationsISO 9001:2015

Get a Quote

Contact us for pricing and technical specifications.

Enquire Now