Heat Shrinkable Cable Jointing Kits
Manufacturer India – 1.1kV to 36kV
IS 13573 & IEC 60502 certified cable jointing kits for XLPE, PVC & PILC cables — straight-through and transition joints installed in 60–90 minutes with hermetic sealing.
Select by Voltage Class
VIKCHEM jointing kits are available for both low voltage and medium voltage cable systems.
XLPE Cable (MV) →
Straight-through heat shrink jointing kits for 11kV, 22kV and 33kV medium voltage XLPE underground cables.
PILC Cable (MV) →
Straight-through PILC-to-PILC and XLPE-to-PILC transition jointing kits for legacy and grid modernisation projects.
Low Voltage (LV) →
LV heat shrink jointing kits for 1.1kV XLPE and PVC armoured and unarmoured underground distribution cables.
Overview
VIKCHEM is one of India's leading heat shrinkable cable jointing kit manufacturers, supplying utilities, EPC contractors and industrial clients since 1986. Our cable jointing kits provide seamless, high-reliability connections between underground cable sections — restoring full electrical integrity, mechanical strength and environmental protection in a single heat-applied operation.
Each VIKCHEM cable jointing kit is designed to IS 13573 and IEC 60502 standards, covering straight-through joints for XLPE-to-XLPE, PILC-to-PILC, XLPE-to-PILC transition joints, and low-voltage 1.1kV joints. Our heat shrinkable cable jointing kits replace traditional resin-filled and tape-wrapped joints with a factory-consistent assembly that is installed in 60–90 minutes and can be backfilled immediately — with no curing time.
With 38+ years of manufacturing experience, ISO 9001:2015 certification, and exports to 15+ countries, VIKCHEM cable jointing kits are trusted in India's state utility networks, railway electrification projects, renewable energy farms, and industrial power distribution from 1.1kV to 36kV.
Joint Kit Types
Straight Through Joint Kit (XLPE to XLPE)
Joins two XLPE cables of the same type and voltage rating. Provides a continuous electrical path with minimal resistance while restoring cable mechanical strength and environmental protection. Available up to 36kV.
Straight Through Joint Kit (PILC to PILC)
Designed for jointing paper insulated lead covered cables where network upgrades require extending or repairing existing PILC infrastructure. Ensures long-term reliability in existing cable networks.
Transition Joint Kit (XLPE to PILC)
Essential for connecting modern XLPE cables to existing PILC networks during grid modernisation projects. Maintains electrical continuity while accommodating different insulation systems across voltage levels.
Low Voltage Heat Shrink Joint Kit
Designed for 1.1kV applications covering LV distribution networks, service connections and industrial wiring. Provides reliable jointing for underground LV cables with superior moisture protection.
Key Benefits
Superior Electrical Performance
Pre-stressed insulation systems minimise partial discharge activity.
Fast Installation
60–90 minutes versus 3–4 hours for traditional resin joints.
Hermetic Moisture Sealing
Prevents water ingress even in submerged or flood-prone trenches.
Compact Design
Smaller dimensions allow installation in restricted spaces.
Factory Controlled Quality
Consistent manufacturing ensures every joint performs identically.
Immediate Backfill
No curing time required — trench can be backfilled immediately after jointing.
Specifications
Applications
- › Underground distribution networks
- › Overhead to underground transitions
- › Grid modernisation (XLPE to PILC)
- › Renewable energy cable runs
- › Industrial & infrastructure projects
- › Flood-prone or submerged trenches